Sanwin environmentally friendly acrylic two-component spray marking coating is a room temperature reactive coating, which is applied through high-pressure airless spraying equipment. When used, the two bases undergo a chemical cross-linking reaction to form a paint film with extremely high density, which in turn produces strong adhesion with the ground and glass beads, and significantly improves the adhesion and wear resistance of road markings. Sanwin two-component spray marking coatings are strong and wear-resistant, have a long-lasting reflective effect, and are widely used. Two-component spray markings can be applied on the original markings without removing the lines, making them the best choice for efficient refurbishment of markings

Since the 20th century, methyl methacrylate (MMA) has been regarded as the best material for making road markings. In the hands of Sanwin, this material has been applied to the road with even better quality, bringing good news to the entire road marking industry. Thanks to our exclusive high-activity acrylic polymer, Sanwin coatings can withstand the test of time and become one of the most reliable road safety facilities on the road, whether in severe cold or heat

▍Features and advantages

◎ Firmly bond glass microbeads, long-lasting reflective life.
◎ Not afraid of ultraviolet rays, no discoloration or fading after long-term use.
◎ Strong climate adaptability, no cracking, no softening.
◎ Better adhesion to asphalt pavement, no vibration when the wheels pass.
◎ Can cover the old line, and the marking line refurbishment efficiency is high.
◎ No heating is required for construction, clean and safer.
◎ Fast drying, can cure quickly in various environments.
◎ No organic solvent volatilization.